RoadSurfaceAttributeNames class
List of attribute names for geometry data loaded through MapTileDataSource for MapTileDataLayer.hdRoads data layer.
Note: This is a beta release of this feature and may contain bugs or exhibit unexpected behaviour. Related APIs are subject to change without a deprecation process.
Constructors
Properties
- hashCode → int
-
The hash code for this object.
no setterinherited
- runtimeType → Type
-
A representation of the runtime type of the object.
no setterinherited
Methods
-
noSuchMethod(
Invocation invocation) → dynamic -
Invoked when a nonexistent method or property is accessed.
inherited
-
toString(
) → String -
A string representation of this object.
inherited
Operators
-
operator ==(
Object other) → bool -
The equality operator.
inherited
Static Properties
- compliantWithSpecification → String
-
Defines a HERE HAD (Highly Autonomous Driving) content specification a feature is compliant with.
final
- countryCode → String
-
ISO country code.
final
- elevated → String
-
Indicates if this road surface is elevated relatively to the ground.
final
- functionalClass → String
-
The hierarchical classification of the road network.
final
- gore → String
-
Indicates if this road surface is a gore area.
final
- isBoatFerry → String
-
The road represents a generalised route of a boat ferry for passengers
or vehicles over water, including routes to pedestrian only islands,
tourist areas, commuter ferry routes open to only pedestrians, etc.
Boat Ferry can be used for map display and routing.
final
- isBridge → String
-
Identifies a structure that allows a road, railway, or walkway
to pass over another road, railway, waterway, or valley serving
map display and route guidance functionalities.
Bridge is published on segments that represent significant
bridges and/or overpasses; elevated roads are not published as bridge.
final
- isCarpoolRoad → String
-
Identifies a road where at some point all lanes serve as carpool lanes,
where HOV vehicles only are allowed to travel.
It can be used to avoid routing on carpool segments and to provide explicit instructions.
Carpool Road is published when all lanes are used as carpool (HOV) and can be closed
to all traffic at specific times or can be open to non-HOV vehicles at specific times.
final
- isControlledAccess → String
-
Controlled access roads are roads with limited entrances and exits
that allow uninterrupted high-speed traffic flow.
For example, the Interstate/Freeway network in the United States or
the Motorway network in Europe.
Controlled Access can be used for map display, avoidance of freeway/motorway,
publishing speed limits, and route guidance timing.
final
- isDeliveryRoad → String
-
Indiciation of a delivery road.
final
- isDiminishedPriority → String
-
Diminished Priority indicates a link allows access to motor vehicles,
but at a reduced speed and volume while giving higher priority
to pedestrians and/or bicycles.
final
- isExpressLane → String
-
An Express Lane is a lane or set of lanes usually physically separated
from the major roadway with limited entry and exit points to quickly move traffic
in and out of a major metropolitan city.
An Express Lane can be reversible, bidirectional, or one-way and can be used
to prioritise ongoing traffic to take the express lane.
final
- isLimitedAccess → String
-
Indicates separately digitised, high speed roads where traffic is controlled via ramps.
Limited Access Road can be used for map display, freeway/motorway avoidance,
and route guidance timing.
In EMEA, Limited Access Road are complementary to Controlled Access road.
In the rest of the world, Limited Access Road is the same as Controlled Access road.
final
- isMovableBridge → String
-
Movable Bridge indicates a bridge that moves to allow passage (usually) for boats or barges.
final
- isMultiplyDigitized → String
-
Multiply Digitised identifies separately digitised roads, i.e., roads that
are digitised with one line per direction of traffic instead of one line per road.
May be used to improve map matching, to improve quality of guidance,
and to identify opposing lanes of traffic when it is reasonable
to represent them as a single line on displays.
Multiply Digitised may be flagged on roads when certain physical features
(e.g. a walkway, a tram, a bus lane) are located between the separately
digitised opposing roadbeds if driver perception remains unchanged.
final
- isPaved → String
-
Indicates whether the navigable segment is paved.
Paved is primarily used for map display and routing by assigning
higher penalties to unpaved roads.
Paved roads are made of concrete, asphalt, cobblestone or brick.
Unpaved roads do not have a solid surface, e.g. are made of gravel, dirt or grass.
final
- isPriorityRoad → String
-
Indicates road stretches that have signs indicating priority on the road.
On these roads all traffic has priority over the traffic on the incoming roads.
Priority Road can be used for route planning to achieve lower fuel consumption
final
- isPrivate → String
-
Private identifies roads that are not maintained by an organisation
responsible for maintenance of public roads.
Allows for unique cartographic representation of roads that restrict public use.
May be used to avoid routing through a private road.
final
- isPublicAccess → String
-
Indicates if the road is available to general public (motorcycle, pedestrian and bicycle)
if not, routing would not propose route going through this segment
but would allow it as starting point or ending point of route
final
- isRailFerry → String
-
The segment represents a generalised route of a ferry for passengers or vehicles via rail.
Rail Ferry is used for display purpose on the map.
Rail Ferry is applied on a segment that represent a ferry route
for vehicles over rail such as: a route for ferrying passengers over rail,
if destination is not accessible by the road network or prohibits the use of automobiles.
final
- isRamp → String
-
Range is a ramp: connects roads that do not intersect at grade.
Ramp allows explication of maneuvers involving ramps (e.g., “Take the ramp”)
and for route guidance when determining if sign text should be used.
final
- isReversible → String
-
A reversible lane is a road which can be physically separated from the motorway
that changes direction for a specific time frame.
For example, all lanes are northbound in the morning then reversed to be southbound
in the evening.
Reversible is published if all lanes on the road are reversible,
which means roads where all lanes are accessible in both directions
at specific times of the day.
final
- isTollway → String
-
Identifies a road for which a fee must be paid to use the road.
Tollway may be used for map display (e.g., different rendering of toll roads) and routing.
Tollway is flagged on roads that require a fee for traversal.
final
- isTunnel → String
-
Identifies an enclosed (on all sides) passageway through or under an obstruction.
This attribute can be used for display or route guidance.
final
- laneType → String
-
Identifies the type of lane.
final
- localId → String
-
The local_id of the road surface in the current tile.
final
- travelDirection → String
-
Travel direction relative to geometry.
final
- truckToll → String
-
Identifies a road for which a fee must be paid to use the road by trucks.
final
- underConstruction → String
-
Indicates if the road is under construction.
final
- zLevel → String
-
The relative vertical stacking of a road surface geometry.
final