LaneMarkingAttributeNames
public struct LaneMarkingAttributeNames
List of attribute names for geometry data loaded through MapTileDataSource for MapTileDataLayer.hdRoadLaneMarkings data layer.
Note: This is a beta release of this feature and may contain bugs or exhibit unexpected behaviour. Related APIs are subject to change without a deprecation process.
-
The relative stacking of the road this lane marking belongs to. Same value as the underlying road surface.
Type: Int64
Declaration
Swift
public static let zLevel: String -
The road represents a generalised route of a boat ferry for passengers or vehicles over water, including routes to pedestrian only islands, tourist areas, commuter ferry routes open to only pedestrians, etc. Boat Ferry can be used for map display and routing.
Declaration
Swift
public static let isBoatFerry: String -
Identifies a structure that allows a road, railway, or walkway to pass over another road, railway, waterway, or valley serving map display and route guidance functionalities. Bridge is published on segments that represent significant bridges and/or overpasses; elevated roads are not published as bridge.
Declaration
Swift
public static let isBridge: String -
Multiply Digitised identifies separately digitised roads, i.e., roads that are digitised with one line per direction of traffic instead of one line per road. May be used to improve map matching, to improve quality of guidance, and to identify opposing lanes of traffic when it is reasonable to represent them as a single line on displays. Multiply Digitised may be flagged on roads when certain physical features (e.g. a walkway, a tram, a bus lane) are located between the separately digitised opposing roadbeds if driver perception remains unchanged.
Declaration
Swift
public static let isMultiplyDigitized: String -
Indicates whether the navigable segment is paved. Paved is primarily used for map display and routing by assigning higher penalties to unpaved roads. Paved roads are made of concrete, asphalt, cobblestone or brick. Unpaved roads do not have a solid surface, e.g. are made of gravel, dirt or grass.
Declaration
Swift
public static let isPaved: String -
Private identifies roads that are not maintained by an organisation responsible for maintenance of public roads. Allows for unique cartographic representation of roads that restrict public use. May be used to avoid routing through a private road.
Declaration
Swift
public static let isPrivate: String -
The segment represents a generalised route of a ferry for passengers or vehicles via rail. Rail Ferry is used for display purpose on the map. Rail Ferry is applied on a segment that represent a ferry route for vehicles over rail such as: a route for ferrying passengers over rail, if destination is not accessible by the road network or prohibits the use of automobiles.
Declaration
Swift
public static let isRailFerry: String -
Identifies an enclosed (on all sides) passageway through or under an obstruction. This attribute can be used for display or route guidance.
Declaration
Swift
public static let isTunnel: String -
Indiciation of a delivery road.
Declaration
Swift
public static let isDeliveryRoad: String -
Movable Bridge indicates a bridge that moves to allow passage (usually) for boats or barges.
Declaration
Swift
public static let isMovableBridge: String -
The physical type of the lane boundary.
Type: String (one of constants defined by
LaneBoundaryTypeAttributeValues)Declaration
Swift
public static let boundaryType: String -
The material of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingMaterialAttributeValues)Declaration
Swift
public static let markingMaterial: String -
The style of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingStyleAttributeValues)Declaration
Swift
public static let markingStyle: String -
The colour of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingColorAttributeValues)Declaration
Swift
public static let markingColor: String -
The width of the lane boundary markings in centimeters;
Type: Int64
Declaration
Swift
public static let markingWidthInCentimeters: String -
The hierarchical classification of the road network.
Type: String (one of constants defined by
FunctionalClassAttributeValues)Declaration
Swift
public static let functionalClass: String -
ISO country code.
Type: String
Declaration
Swift
public static let countryCode: String -
Identifies a road where at some point all lanes serve as carpool lanes, where HOV vehicles only are allowed to travel. It can be used to avoid routing on carpool segments and to provide explicit instructions. Carpool Road is published when all lanes are used as carpool (HOV) and can be closed to all traffic at specific times or can be open to non-HOV vehicles at specific times.
Declaration
Swift
public static let isCarpoolRoad: String -
Controlled access roads are roads with limited entrances and exits that allow uninterrupted high-speed traffic flow. For example, the Interstate/Freeway network in the United States or the Motorway network in Europe. Controlled Access can be used for map display, avoidance of freeway/motorway, publishing speed limits, and route guidance timing.
Declaration
Swift
public static let isControlledAccess: String -
An Express Lane is a lane or set of lanes usually physically separated from the major roadway with limited entry and exit points to quickly move traffic in and out of a major metropolitan city. An Express Lane can be reversible, bidirectional, or one-way and can be used to prioritise ongoing traffic to take the express lane.
Declaration
Swift
public static let isExpressLane: String -
Indicates separately digitised, high speed roads where traffic is controlled via ramps. Limited Access Road can be used for map display, freeway/motorway avoidance, and route guidance timing. In EMEA, Limited Access Road are complementary to Controlled Access road. In the rest of the world, Limited Access Road is the same as Controlled Access road.
Declaration
Swift
public static let isLimitedAccess: String -
Indicates road stretches that have signs indicating priority on the road. On these roads all traffic has priority over the traffic on the incoming roads. Priority Road can be used for route planning to achieve lower fuel consumption
Declaration
Swift
public static let isPriorityRoad: String -
Range is a ramp: connects roads that do not intersect at grade. Ramp allows explication of maneuvers involving ramps (e.g., “Take the ramp”) and for route guidance when determining if sign text should be used.
Declaration
Swift
public static let isRamp: String -
A reversible lane is a road which can be physically separated from the motorway that changes direction for a specific time frame. For example, all lanes are northbound in the morning then reversed to be southbound in the evening. Reversible is published if all lanes on the road are reversible, which means roads where all lanes are accessible in both directions at specific times of the day.
Declaration
Swift
public static let isReversible: String -
Identifies a road for which a fee must be paid to use the road. Tollway may be used for map display (e.g., different rendering of toll roads) and routing. Tollway is flagged on roads that require a fee for traversal.
Declaration
Swift
public static let isTollway: String -
Diminished Priority indicates a link allows access to motor vehicles, but at a reduced speed and volume while giving higher priority to pedestrians and/or bicycles.
Declaration
Swift
public static let isDiminishedPriority: String -
Indicates if the road is available to general public (motorcycle, pedestrian and bicycle) if not, routing would not propose route going through this segment but would allow it as starting point or ending point of route
Declaration
Swift
public static let isPublicAccess: String -
Identifies a road for which a fee must be paid to use the road by trucks.
Type: Boolean
Declaration
Swift
public static let truckToll: String -
Indicates if the road is under construction.
Type: Boolean
Declaration
Swift
public static let underConstruction: String -
The material of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingMaterialAttributeValues)Declaration
Swift
public static let element1MarkingMaterial: String -
The style of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingStyleAttributeValues)Declaration
Swift
public static let element1MarkingStyle: String -
The colour of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingColorAttributeValues)Declaration
Swift
public static let element1MarkingColor: String -
The width of the lane boundary markings in centimeters;
Type: Int64
Declaration
Swift
public static let element1MarkingWidthInCentimeters: String -
The material of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingMaterialAttributeValues)Declaration
Swift
public static let element2MarkingMaterial: String -
The style of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingStyleAttributeValues)Declaration
Swift
public static let element2MarkingStyle: String -
The colour of the lane boundary marking element.
Type: String (one of constants defined by
LaneBoundaryMarkingColorAttributeValues)Declaration
Swift
public static let element2MarkingColor: String -
The width of the lane boundary markings in centimeters;
Type: Int64
Declaration
Swift
public static let element2MarkingWidthInCentimeters: String